Elektrischer Schwenkantrieb BRA.003 für BRA-Armaturen – 230 V AC, AUF/ZU, 30 Nm
Artikelnummer: BRA-003.230Produktdetailbeschreibung
Antrieb für BRA-Absperrarmaturen
Der BRA.003 ist ein elektrischer Schwenkantrieb mit 90° Drehwinkel zur Betätigung von Zwischenflansch-Absperrklappen sowie Flansch- und Gewinde-Kugelhähnen von BRANDONI aus dem IVAR-Sortiment. Bei 230 V AC liefert er ein Drehmoment von 30 Nm und wird über einen Flansch nach ISO 5211 an die Armatur angebaut. Der Antrieb arbeitet im AUF/ZU-Betrieb – er öffnet oder schließt die Armatur vollständig; ausgelegt für Betriebsart S2-15 min und höchstens 600 Starts pro Stunde.
Eigenschaften
- Gehäuse aus eloxiertem Aluminium, polyester-pulverbeschichtet, witterungsbeständig
- Schutzart IP 68 – auch gegen zeitweiliges Untertauchen geschützt
- 4 Endschalterkontakte (2 End- + 2 Hilfsendschalter, SPDT 250 V AC / 10 A), potenzialfrei an der Klemmleiste für Fernmeldung
- einstellbare mechanische Anschläge und optische Stellungsanzeige
- thermischer Überlastschutz (öffnet bei +120 °C)
- Handbetätigung mit Innensechskantschlüssel, der im Antrieb verstaut ist
- Stellzeit 20 s/90°, Strom 0,25 A, Leistungsaufnahme 8 W, Gewicht 2,1 kg
Kombination mit Armaturen
In den fertigen IVAR-Sets werden Antriebe mit 30 Nm zum Beispiel mit diesen Armaturen kombiniert: Flansch-Kugelhahn BRA.B2.100 DN 25 / DN 32; Zwischenflansch-Absperrklappe BRA.J9.100 DN 32–50; Gewinde-Kugelhahn BRA.B3.622 1/2"–5/4". Für die Antriebsauswahl empfiehlt der Hersteller, das Betriebsdrehmoment der Armatur mit dem Sicherheitsfaktor 1,5 zu multiplizieren. Der Anschluss an 230 V darf nur durch eine Elektrofachkraft erfolgen.
Technische Daten
| Artikelnummer | BRA-003.230 |
| Hersteller | IVAR |
| Typ | BRA.003 |
| Drehmoment | 30 Nm |
| Spannung | 230 V AC ±10 %, 50/60 Hz |
| Ansteuerung | AUF/ZU |
| Stellzeit | 20 s / 90° |
| Leistung / Strom | 8 W / 0,25 A |
| Drehwinkel | 90° ±10 % |
| Schutzart | IP 68 |
| Endschalter | 2 + 2 Hilfsschalter, SPDT 250 V AC / 10 A |
| Umgebungstemperatur | -25 bis +70 °C |
| Kabelverschraubung | M12 × 1,5 |
| Gewicht | 2,1 kg |
Häufige Fragen
Auf welche Armaturen wird der Antrieb montiert?
Auf Zwischenflansch-Absperrklappen sowie Flansch- oder Gewinde-Kugelhähne BRA mit Anschluss nach ISO 5211. In IVAR-Sets wird die Version mit 30 Nm zum Beispiel verwendet für: Flansch-Kugelhahn BRA.B2.100 DN 25 / DN 32; Zwischenflansch-Absperrklappe BRA.J9.100 DN 32–50; Gewinde-Kugelhahn BRA.B3.622 1/2"–5/4".
Was ist der Unterschied zur Version mit P im Code?
Dieser Antrieb arbeitet im AUF/ZU-Betrieb. Antriebe mit dem Buchstaben P am Ende des Codes haben eine modulierende Ansteuerung 0–10 V.
Kann der Antrieb auch von Hand betätigt werden?
Ja, der Antrieb hat einen Handbetrieb. Die Armatur lässt sich mit dem Innensechskantschlüssel verstellen, der direkt im Antrieb verstaut ist.
Zusätzliche Parameter
| Kategorie: | Edelstahl- und Flanscharmaturen |
|---|---|
| Garantie: | 2 Jahre |
| Gewicht: | 2.1 kg |
| Artikelnummer: | BRA-003.230 |
| Hersteller: | IVAR |
| Typ: | BRA.003 |
| Drehmoment: | 30 Nm |
| Spannung: | 230 V AC ±10 %, 50/60 Hz |
| Ansteuerung: | AUF/ZU |
| Stellzeit: | 20 s / 90° |
| Leistung / Strom: | 8 W / 0,25 A |
| Drehwinkel: | 90° ±10 % |
| Schutzart: | IP 68 |
| Endschalter: | 2 + 2 Hilfsschalter, SPDT 250 V AC / 10 A |
| Umgebungstemperatur: | -25 bis +70 °C |
| Kabelverschraubung: | M12 × 1,5 |
| Gewicht: | 2,1 kg |
Produktbewertung
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
Diskussion
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
„Made in Italy“ adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
