Flansch-Gummikompensator IVAR BRA.F8.520 – DN 200, L = 177 mm
Artikelnummer: F8520200Produktdetailbeschreibung
Einsatz
Der Kompensator gleicht Längung und Stauchung der Rohrleitung, axialen Versatz und Winkelabweichung aus, dämpft die Übertragung von Schwingungen und Geräuschen und mildert Druckstöße. Er wird in Wasserwerken, Industrie, Landwirtschaft und Druckluftnetzen eingesetzt.
Eigenschaften
- Elastikelement aus EPDM, Verstärkung aus Nylongewebe und Stahldraht-Sicherungsring, drehbare Flansche aus Edelstahl AISI 316
- PN 16, Einbau zwischen Flansche PN 10 und PN 16 (EN 1092 / ISO 7005), Temperatur -10 bis +100 °C
- DN 200 gleicht Stauchung 20 mm, Dehnung 14 mm, seitlichen Versatz 18 mm und Winkelversatz 15° aus
- DN 200: Gewicht 17,5 kg, Kv 5957 m³/h
Montage und Betrieb
Beim Einbau die Flansche des Kompensators drehen, bis alle Bohrungen des Gegenflanschs übereinstimmen, und ihn nicht direkter Sonneneinstrahlung aussetzen. Der Kompensator ist weder für Dampf noch für Vakuum geeignet. Die Montage sollte ein Fachbetrieb übernehmen.
Technische Daten
| Artikelnummer | F8520200 |
| Hersteller | IVAR |
| Typ | BRA.F8.520 |
| Nennweite | DN 200 |
| Baulänge | 177 mm |
| Max. Druck | PN 16 |
| Temperaturbereich | -10 °C … +100 °C |
| Flansche | EN 1092 / ISO 7005, PN 10/16 |
| Elastisches Element | EPDM |
| Flanschmaterial | Edelstahl AISI 316 |
| Stauchung | 20 mm |
| Dehnung | 14 mm |
| Seitlicher Versatz | 18 mm |
| Winkelversatz | 15° |
| Kv | 5957 m³/h |
| Gewicht | 17,5 kg |
Häufige Fragen
Was gleicht der Kompensator BRA.F8.520 aus?
Längung und Stauchung der Leitung, axialen Versatz und Winkelabweichung. Bei DN 200 sind das 20 mm Stauchung, 14 mm Dehnung, 18 mm seitlicher Versatz und 15° Winkel.
Lässt sich die Bewegung des Kompensators begrenzen oder die Schwingung weiter dämpfen?
Ja. Das Datenblatt nennt Begrenzungsstangen BRA.F8.KIT zur Begrenzung von Dehnung und Stauchung sowie schwingungsdämpfende Zwischenstücke BRA.W8.500 zur weiteren Reduzierung von Geräuschen und Schwingungen. Beides wird separat bestellt.
Eignet sich der Kompensator für Dampf oder Vakuum?
Nein, das Produkt ist weder für Dampf noch für Vakuum geeignet. Die Betriebstemperatur beträgt -10 bis +100 °C, die Druckstufe PN 16.
Zusätzliche Parameter
| Kategorie: | BRA.F8.520 - Gummikompensator - Edelstahl |
|---|---|
| Garantie: | 2 Jahre |
| Gewicht: | 17.5 kg |
| Artikelnummer: | F8520200 |
| Hersteller: | IVAR |
| Typ: | BRA.F8.520 |
| Nennweite: | DN 200 |
| Baulänge: | 177 mm |
| Max. Druck: | PN 16 |
| Temperaturbereich: | -10 °C … +100 °C |
| Flansche: | EN 1092 / ISO 7005, PN 10/16 |
| Elastisches Element: | EPDM |
| Flanschmaterial: | Edelstahl AISI 316 |
| Stauchung: | 20 mm |
| Dehnung: | 14 mm |
| Seitlicher Versatz: | 18 mm |
| Winkelversatz: | 15° |
| Kv: | 5957 m³/h |
| Gewicht: | 17,5 kg |
Produktbewertung
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
Diskussion
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
„Made in Italy“ adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
